The equipment adopts German Siemens PLC control system, integrated machine design, easy to install, rewinding and unwinding on the same side, convenient for operation observation and driving unloading (reverse structure can also be customized according to customer needs, and CCD detection position is reserved); The diameter of unwinding and unwinding is calculated independently, no need to input the material thickness, the calculation accuracy of the roll diameter is ±1mm, the set number of meters will automatically decelerate and stop, and the unwinding will automatically decelerate and stop without material. The raw material is rolled up and automatically enters the host, saving time and effort; the unwinding is controlled by a servo motor, the tension signal is fed back, the running tension is stable, the unwinding mechanism is designed according to the size of the winding roll of the foil machine; the host adopts a set of servo motor drive and traction Pressure roller, precision knife groove roller, power small round knife is used for slitting, the slitting end surface is smooth and flat, no color difference, no burr, slitting part is equipped with dust suction device, winding is controlled by two sets of servo motors, winding tension signal feedback , The taper tension can be set, and the side material is automatically unloaded, which is convenient and quick. The electrical components of the equipment adopt well-known domestic and foreign brands, with high degree of automation, humanized operation, high efficiency, low noise, and stable performance.

The equipment adopts German Siemens PLC control system, split design, reverse operation of rewinding and unwinding, CCD detection and thickness gauge installed between unwinding and host; independent calculation of rewinding and unwinding diameter, no need to input material thickness, roll diameter calculation accuracy Within ±1mm, the set number of meters will automatically decelerate and stop, and the unwinding will automatically decelerate and stop; the unwinding adopts servo motor control, tension signal feedback, and the running tension is stable. The unwinding mechanism can be designed according to the size of the rewinding roll of the raw foil machine; It adopts a set of servo motor drive, equipped with traction pressure roller, precision knife groove roller, and the feed roller is equipped with a dust-sticking roller. The cutting adopts a small power round knife. The cutting end surface is smooth and flat without color difference. The cutting part is equipped with a dust suction device. The rewinding is controlled by two sets of servo motors, two sets of tension sensors and two sets of translation mechanisms are adopted, the tension running is stable, and the side material is automatically unloaded, which is convenient, fast, time-saving and labor-saving.