Microcomputer Controlled high-precision copper foil slitting machine
The equipment adopts German Siemens PLC control system, split design, reverse operation of rewinding and unwinding, CCD detection and thickness gauge installed between unwinding and host; independent calculation of rewinding and unwinding diameter, no need to input material thickness, roll diameter calculation accuracy Within ±1mm, the set number of meters will automatically decelerate and stop, and the unwinding will automatically decelerate and stop; the unwinding adopts servo motor control, tension signal feedback, and the running tension is stable. The unwinding mechanism can be designed according to the size of the rewinding roll of the raw foil machine; It adopts a set of servo motor drive, equipped with traction pressure roller, precision knife groove roller, and the feed roller is equipped with a dust-sticking roller. The cutting adopts a small power round knife. The cutting end surface is smooth and flat without color difference. The cutting part is equipped with a dust suction device. The rewinding is controlled by two sets of servo motors, two sets of tension sensors and two sets of translation mechanisms are adopted, the tension running is stable, and the side material is automatically unloaded, which is convenient, fast, time-saving and labor-saving.