The equipment adopts the German Siemens PLC control system, 10" touch screen, three sets of servo motors with servo drives to control the main traction and automatic winding tension, and the air-cooled magnetic powder brake system controls the unwinding tension during the slitting process, and automatically decelerates to the meter. When stopping and unwinding to a small diameter, it will automatically decelerate and stop, and automatically calculate the diameter of winding and unwinding, with a diameter tolerance of ±1mm. The winding method is single-shaft winding, and the winding shaft adopts a special inflatable shaft. The slitting adopts a straight knife or a disc Knife,

The equipment adopts the German Siemens PLC control system, 10" touch screen, three sets of servo motors with servo drives to control the main traction and automatic winding tension, and the air-cooled magnetic powder brake system controls the unwinding tension during the slitting process, and automatically decelerates to the meter. When stopping and unwinding, it will automatically decelerate and stop, automatically calculate the diameter of rewinding and unwinding, and the diameter tolerance is ±1mm. The rewinding method is central surface rewinding, or single-shaft rewinding. The rewinding shaft adopts a dedicated air shaft or mechanical shaft. The slitting adopts straight knife or disc knife, and the corresponding knife can be selected for different thickness materials, and the slitting width can be adjusted arbitrarily.